FlightJacket.com
Bookmark and Share

Regular Price: $120.00

Special Price: $99.00

Availability: In stock
  • Water repellent 100% flight nylon outer shell
  • Quilted nylon lining and polyester interlining
  • Side arm pocket and high angled front pockets
  • Front zipper closure with storm flap
  • Knit collar, cuffs and waistband
  • Alpha signature utility/pencil pocket
  • Inside reverses to Emergency Orange for high visibility during rescue missions
  • Military fitted look

* Required Fields

Regular Price: $120.00

Special Price: $99.00

More Views

  • MA-1 Navy
  • MA-1 Black
  • MA-1 Replica Blue
  • MA-1 Gun Metal
  • MA-1 Sage Green

ALPHA INDUSRTIES Genuine Army, Navy and Air force, govt. spec nylon flight jacket, satin reversible to bright orange, inside map pocket and pen slots on left sleeve zipper pocket, insulated with 100% polyester fill. The MA-1 jacket was first developed in the mid 1950's.

The MA-1 and its predecessor, the B-15 Flight Jacket, were needed at that time because the emergence of the jet age created new requirements for pilot performance, safety and comfort. Prior to the invention of jet aircraft, fleece-lined leather jackets were issued to flight personnel. However, the new jets could fly at much higher altitudes and in much colder temperatures than propeller aircraft. If the heavy, bulky leather jackets became wet from rain (when the pilot walked to his aircraft) or from perspiration, the water would freeze at high altitudes, making the jackets cold and uncomfortable. Also, the new jets were more streamlined in design. Cockpits were cramped and filled with new equipment. Speedy, unimpeded access to and from cockpits became even more critical for safety. Rather than bulky leather, a sleek, lightweight yet warm jacket was needed for the new jet technology. To meet these needs, a new type of flight jacket was developed. The material selected for the jacket was high quality nylon. Nylon had been discovered prior to World War II but it was not used in flight clothing until after the war, possibly because the demand for nylon for items such as parachutes consumed the available supply during the war. The initial nylon flight jacket was designed in about 1946. It was called the B-15 flight jacket (MIL-J-6251). The B-15 was similar to the MA-1 except that it had a mouton fur collar. After a few years, it was discovered that the B-15 fur collar frequently interfered with placement of the pilot's parachute or other equipment and the Air Force decided to discontinue the B-15 and replace it with the new MA-1 flight jacket. The first MA-1 jackets were issued around 1949 or 1950 to United States Air Force and Navy pilots and flight crews. Small numbers were also issued to Army flight personnel. Alpha Industries' first government contract was awarded in 1958 (MIL-J-1958B). MA-1 jackets first appeared in Europe in very small quantities in the mid-to-late 1950's probably on the black market and at sales of government surplus. In the early to mid-1960's more MA-1 jackets appeared in Europe as Alpha Industries began to export MA-1 jackets and other military clothing to European Air Forces and commercial customers. MA-1 Is an All Season jacket. The MA-1 was designed by the Air Force to serve as an Intermediate Weight Flight Jacket for use all year. This was accomplished by manufacturing the MA-1 from very high quality nylon fabrics and polyester interlinings. The light weight nylon design allowed the pilot in warm weather to wear the jacket open and be comfortable; upon entering the aircraft, the pilot could zip the MA-1 closed and be afforded ample protection against the cold conditions encountered in flight.

Design of the MA-1 Flight Jacket

The MA-1 has undergone various design modifications during its long history of use, but its classic, highly functional design has remained basically the same. The original design was contained in U.S. Government Military Specification "MIL-J-8279." Changes to the MA-1 jacket were periodically made by the Air Force. These occurred because of the introduction of new textiles, new sewing techniques or new aircraft cockpit design which required a change in the jacket design. The Military Specification was amended to reflect the changes, which was signaled by adding a letter to the Mil. Spec. For example, MA-1 specifications progressed from the original number Mil-J-8279, to J-8279A, J-8279B, J-8279C, etc. The most recent revision, J-8279F, was issued in the early 1980's. The MA-1 as originally designed was made from a high quality nylon outer shell and a nylon lining. In between these nylon layers was a double-faced wool material for warmth. After a few years the wool interlining was replaced by the newly developed polyester fiberfill interlining. The polyester replaced the wool because it made the jacket much lighter and provided superior warmth. The MA-1 introduced two major design changes from its predecessor, the B-15. First, the MA-1 discarded the mouton fur collar and substituted a knit collar. This was done because the fur collar interfered with the parachute harness worn by the aviators. Another important change that appeared in the mid 1960's (MIL-J8279D) was to make the jacket reversible and add the bright Indian Orange lining. If the airplane crash-landed and the pilot escaped, he could reverse the jacket to the orange side for a highly visible signal to rescue personnel. Other changes have been made to the original MA-1 design over the years. For example, the early MA-1 models contained a front tab where the pilot could clip his oxygen mask when not in use. After several years, advances in airplane design and pilot helmet oxygen systems made the clip-on arrangement unnecessary, and the front tab was removed from the jacket. Similarly, the first MA-1 models had sewn loops to hold the wired running from the radio to the pilot's helmet. When radio improvements made this unnecessary, the sewn loops were removed from the jacket. The early MA-1 flight jackets used by the Air Force had the United Sates Air Force insignia printed on the sleeve. This was dropped in later MA-1 models in favor of sewn-on patches or insignia of the specific military units. The MA-1 and its ancestor, the B-15, were produced in two colors: Sage Green and Midnight Blue. Blue was the original color used by the military but it was soon replaced by the sage green color. During the Korean War period, (1950-1953) mixing flight clothing from multiple time periods and colors was not unusual. Presumably, the green was eventually adopted because it blended more easily with the environment should the pilot need camouflage protection on the ground.

Technical Details of the MA-1

Each Alpha jacket is engineered for the highest quality. Consistency in construction in all Alpha MA-1 jackets ensures that every Alpha MA-1 jacket looks identical and meets strict standards. The MA-1 requires 57 separate sewing operations. These operations are highly engineered and each has a distinct quality purpose. The utility pocket, originally called the "cigarette pocket" involves 8 sewing operations. The embroidered Alpha logo label is stitched into the left pocket, along with the white "specification" label. The labels are sewn inside so that they will not show if the jacket is reversed. When comparing the authentic Alpha MA-1 to other MA-1's, look for the following special details in our construction: * For extra strength - edge stitching on pocket flaps, bar tacks on interior and exterior pockets to prevent tearing, reinforced pocket snaps, double needle lap seams on sleeves, top stitching on jacket back and cuffs; * A neatly constructed utility pocket with a % inch taper and square corners in the bellows construction, with precisely positioned pencil point protectors; * The knit at the bottom of the jacket is attached to the shell of the jacket, (not sewn between the jacket lining and the shell, because that type of construction can result in a lumpy appearance), and the knit is stretched uniformly over the bottom width of the coat, stopping about 1.5 inches from the ends of the shell. * The quilt on the storm flap is constructed using a 3 inch quilt on the points, + or -1/4 inch. The Alpha MA-1 that is sold to the commercial market has several deviations from the government specification. These changes have little or no effect on the appearance and performance of the jackets. They are done to make the jackets more salable to retailers and consumers. These deviations include: * Water repellent treated. This makes the garment more resistant to water and wind; * Knit collar, cuffs and waistband are an acrylic blend rather than 100% wool. It has been found that wool does not wear as well as acrylic and is subject to insect damage. * The interlining is a cut staple, non-quilted polyester batting rather than a quilted, continuous staple polyester batting. The MA-1 flight jacket is perhaps the most popular clothing item ever designed for the United States military forces. Its official name is "Jacket, Flyers, Man's Intermediate Type MA-1" (MIL-J-8279). Alpha Industries (and its predecessor, Dobbs Industries), has continuously manufactured the MA-1 since the 1950's. Alpha is the largest and virtually only supplier of the MA-1 jacket for the United States military from the 1950's to date.

You may also be interested in the following product(s)

B-15 Jacket

B-15 Jacket

Regular Price: $150.00

Special Price: $119.00

CWU 45P

CWU 45P

Regular Price: $130.00

Special Price: $114.00

MA-1 Nylon Jacket

MA-1 Nylon Jacket

Regular Price: $59.00

Special Price: $49.00

 

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

2 Item(s)

per page
  1. Alpha really does deliver! Review by Kevin C

    Alpha Industries really does a fantastic job on their MA-1 jacket, my uncle was an Airforce pilot in Vietnam from 1966-72, when he came home, he had two items from his service, his dog tags, and his MA-1 flight jacket. He still wears it on occasion in cold weather. I've always admired the looks, feel, warmth, and story behind the MA-1 jackets. So, I had to get one for myself, I knew Alpha made high quality reproduction MA-1s, so when my jacket arrived, I compared it to my uncle's 1966 original, apart from the 44 years of wear and tear on the cuffs, collar and waistband, the Alpha MA-1 jacket repro is nearly identical to the original, correct materials, stitching, correct stitch coloring, correct cut, weaving and fit, the pockets, identification label (though the "Alpha Industries" label next to the I.D. label in the left pocket shouldn't be there), the utility pocket and pen holders are correct to the original (though the weaving material the pocket zipper is placed on should be a "dove gray", not sage green (or whichever color jacket you order), that goes for the main zipper panel. I would strongly recommend they change that for further authenticity, other than those minor problems, the Alpha MA-1 is pretty much identical to the original, and a great general purpose utility jacket, it's flight nylon outer shell is fabulous, exact same as the original, so is the quilted Indian Orange nylon lining. I typically swap out my A-2 jacket when in cold weather with my MA-1, it's really a high performance jacket, I highly recommend getting one, it's VERY warm and comfortable, with great durability, this one will last you for years to come. (Posted on 11/20/10)

  2. Identical to the original Review by Greg Gregor (October 2007)

    Excellent product! My original MA1 was taken from my truck and I was thrilled to find I could get another. The details and quality are identical to the original. The only difference I found was the sleeves, I believe mine had the "articulated" elbows. Thanks for making a great product! (Posted on 8/2/10)

2 Item(s)

per page

Write Your Own Review

You're reviewing: MA-1 Nylon SPEC Jacket by ALPHA

 

Customer Reviews

Alpha really does deliver! Review by Kevin C
Alpha Industries really does a fantastic job on their MA-1 jacket, my uncle was an Airforce pilot in Vietnam from 1966-72, when he came home, he had two items from his service, his dog tags, and his MA-1 flight jacket. He still wears it on occasion in cold weather. I've always admired the looks, feel, warmth, and story behind the MA-1 jackets. So, I had to get one for myself, I knew Alpha made high quality reproduction MA-1s, so when my jacket arrived, I compared it to my uncle's 1966 original, apart from the 44 years of wear and tear on the cuffs, collar and waistband, the Alpha MA-1 jacket repro is nearly identical to the original, correct materials, stitching, correct stitch coloring, correct cut, weaving and fit, the pockets, identification label (though the "Alpha Industries" label next to the I.D. label in the left pocket shouldn't be there), the utility pocket and pen holders are correct to the original (though the weaving material the pocket zipper is placed on should be a "dove gray", not sage green (or whichever color jacket you order), that goes for the main zipper panel. I would strongly recommend they change that for further authenticity, other than those minor problems, the Alpha MA-1 is pretty much identical to the original, and a great general purpose utility jacket, it's flight nylon outer shell is fabulous, exact same as the original, so is the quilted Indian Orange nylon lining. I typically swap out my A-2 jacket when in cold weather with my MA-1, it's really a high performance jacket, I highly recommend getting one, it's VERY warm and comfortable, with great durability, this one will last you for years to come. (Posted on 11/20/10)
Identical to the original Review by Greg Gregor (October 2007)
Excellent product! My original MA1 was taken from my truck and I was thrilled to find I could get another. The details and quality are identical to the original. The only difference I found was the sleeves, I believe mine had the "articulated" elbows. Thanks for making a great product! (Posted on 8/2/10)